636
77
Learn how to deploy one large language model across two GPU nodes on Amazon EKS using the multi-node Ray LLM Deep Learning Containers, with separate prefill and decode nodes behind one OpenAI-compatible endpoint. The pre-built container ships the full inference stack, so you configure the deployment instead of assembling it.
The post Introducing Microsoft’s latest custom chip: Maia 300 appeared first on Source .
Microsoft is announcing its third-generation Maia in-house AI chip today, designed to be the "primary AI inference system" for Microsoft's products and services. Maia 300…
Dynamic sparse training (DST) aims to reduce training costs while maintaining accuracy. Existing DST methods mask out parameters but keep matrix dimensions unchanged. Training speedups therefore depend on specialized support, such as sparse kernels. We introduce BARTER, a structured DST framework that reduces training cost using standard dense kernels by keeping training tensors physically compact while dynamically reallocating capacity across layers. Unlike existing works that require computing gradients for all parameters, BARTER instead uses statistics collected only from active units during ordinary backpropagation to prune and clone attention heads and feed-forward channels under separate fixed global budgets. At each topology update, it resizes the affected parameter tensors and remaps their optimizer states, so subsequent training steps operate directly on the compact model. Training and fine-tuning experiments with Transformer-based vision models on two image classification benchmarks at densities from 0.1 to 0.7 show competitive Top-1 accuracy relative to full-tensor DST baselines. On an NVIDIA L40, BARTER achieves speedups of up to 6.29in measured training segments and reduces peak allocated GPU memory by up to 81.3\% relative to these implementations. An iPhone 13 Pro Max training benchmark additionally shows a 2.78speedup over the full-tensor DST baseline.
The increasing demand for GPU-accelerated machine learning inference has exposed limitations in centralized GPU infrastructures, including high cost, limited elasticity, and long wait times under resource constraints. At the same time, modern Apple Silicon–based macOS devices are equipped with powerful GPUs that remain largely idle during normal usage. This paper presents Minions, a dynamic and distributed virtual GPU cloud that…
LLM multi-agent systems split work across agents that communicate through text. An agent summarizes its findings, another agent receives the text. This constrains communication to discrete tokens and costs redundant compute, limiting bandwidth and capabilities of multi-agent systems. Recent works demonstrate KV-cache transfer between LLMs but they either require the LLMs to be within the same family or cannot function across context, thus requiring the receiver to prefill text. We present SwaT (Swarm Telepathy), the first cross-family KV-cache transfer method that allows prefill-free communication in multi-family multi-agent systems. In an agent-to-agent communication setting, combining SwaT with recent advances in KV-cache compaction beats text-to-text communication in both accuracy and speed, with a mean of 40\% higher accuracy and a mean of 4faster wall-clock time. Experiments show SwaT achieves high performance on 17 benchmarks across 12 LLMs and 6 families. Additionally, given a sender Vision-Language Model (VLM), SwaT is able to transfer the vision capabilities to a text-only receiver LLM exceeding text-to-text communication despite SwaT being trained on text-only data. SwaT keeps both sender and receiver models frozen without fine-tuning and only requires <50M tokens and <1 GPU-day to train.
Automated disease classification from patient-reported symptoms requires balancing the speed of lightweight discriminative models against the contextual understanding and latency costs of autoregressive large language models (LLMs). Decision foundation models offer an alternative by mapping representations directly to candidate classes without free-form text generation. We adapt Clef-Flash, a 9-billion-parameter decision model built on a Qwen3.5 backbone, for 24-class disease classification on the Symptom2Disease benchmark. Using 4-bit quantized low-rank adaptation (QLoRA) with differential learning rates and a stratified split of 960 training and 240 test cases, the model achieves 95.42% diagnostic accuracy and a macro F1 score of 0.9551. This improves upon the reported zero-shot baselines of 61.67% for a remote API and 65.00% for a local unadapted initialization, and outperforms the ClinicalBERT baseline (90.90%). By evaluating candidate logits in a single forward pass without autoregressive decoding, inference takes under 80 milliseconds per record on a single GPU, yielding a reported 31-fold speedup over generative LLM baselines. To examine symptom-level evidence, we introduce a Leave-One-Symptom-Out (LOSO) counterfactual perturbation framework. Removing disease-defining symptom clauses in a psoriasis example reduces predicted-class confidence from 100.00% to 0.12% and shifts the prediction to impetigo with 99.59% confidence, while removing secondary systemic symptoms produces less than 0.01% change in confidence. These findings suggest that decision-based architectures can combine the linguistic capabilities of large foundation models with low-latency inference and symptom-level interpretability for clinical triage.
Generative molecular design typically relies on over-generation and post-hoc filtering. Inference-time steering methods like Feynman-Kac (FK) steering improve efficiency by biasing trajectories toward high-reward candidates, yet they optimize within a single fixed configuration. In de novo nanobody design, upfront commitment to conditioning choices like scaffold identity or target epitope creates a bottleneck. Since yield varies across these conditions, steering unpromising setups wastes compute. We recast generative condition selection as an inference-time resource-allocation problem. We propose two dynamic budget allocators: a joint Global Sequential Monte Carlo (SMC) formulation that steers and allocates compute across configurations concurrently, and a decoupled approach adapting Batched Successive Elimination (BaSE). Empirically, these dynamic allocators increase the yield of designable candidates per GPU-hour nearly 5without sacrificing diversity across distinct therapeutic targets and generative configurations.
A monthly recap of the latest Amazon Bedrock, Amazon Bedrock AgentCore, and Strands updates from September 2026: broader model choice, faster serverless agents with built-in evaluation, and automated knowledge base syncing with native enterprise connectors.
Speech recognition on low-cost microcontrollers is, in practice, limited to keyword spotting or a fixed list of commands. We present Oído, an inference engine that runs open-vocabulary English speech recognition entirely on an ESP32-S3 (240 MHz dual-core Xtensa LX7, 512 KB of SRAM, 8 MB of PSRAM, 16 MB of flash, no neural accelerator). Oído executes a 13M-parameter Conformer-CTC model with int8 weights, per-frame dynamic int8 activations and int8 attention on the chip's SIMD instructions, with a schedule designed around flash and PSRAM bandwidth. On LibriSpeech test-clean/test-other the on-device arithmetic reaches 3.70%/8.23% word error rate (WER), within 0.12 points of full precision, and 3.33%/7.15% with an on-chip 1.3M-parameter language model; a transducer head gives 2.99%/6.67% and an int4 variant fits in 8.3 MB. This is 2.3-2.8x fewer errors than the vendor's recognizer on the same chip, and fewer than Whisper tiny.en and Moonshine tiny in full precision on a laptop, including in real noise and reverberation. Measured on a physical board, the firmware runs at 1.97x the duration of the audio on one core, with transcripts identical to an instruction-exact emulator: accurate, but not yet real time (a 4 s command is transcribed about 8.7 s after it ends). The two-core schedule gives wrong results on silicon and is disabled. A streaming variant shows partial text while the speaker talks and delivers the final text 4.1-11.1 s after clips of 3.6-10.6 s (7.2-22.4 s in utterance mode) at 4.86%/11.03% WER; a Spanish model makes 34-60% fewer errors than multilingual Whisper tiny. Code and models are released.
Kernel Ridge Regression (KRR) is a theoretically sound algorithm for nonparametric learning, which is also often used to investigate properties of deep learning. However, the exact KRR formulation incurs time and memory costs preventing applicability to large datasets, motivating the development of approximate solvers. These algorithms rely on (i) iterative methods, to avoid the computational burden of direct solutions; (ii) sketching or batching, to reduce the problem size; and (iii) preconditioning, to accelerate convergence. While crucial for fast convergence, preconditioning incurs memory costs that can be managed by lowering the number of free parameters of the model, potentially at the expense of expressivity and hence accuracy. To address this challenge, we propose BLOKS, a Conjugate Gradient-based solver for Nyström-sketched KRR built around a novel preconditioner that combines a block Jacobi approximation with sketching. The BLOKS preconditioner has memory cost independent of both the dataset size and the number of parameters, allowing scaling to large models. We provide a memory-efficient, GPU-accelerated implementation and show that BLOKS achieves excellent accuracy while retaining favorable time/memory complexity. Indeed, on standard large-scale datasets used to benchmark kernel solvers, BLOKS achieves comparable or better performances than state-of-the-art methods.
Anatomical continuity provides complementary information for medical image restoration, but its use requires accounting for local anatomy and variations in slice sampling. We introduce ContiLNN, which augments two-dimensional restoration backbones with bidirectional closed-form continuous-time (Bi-CfC) modules for cross-slice modeling while retaining in-plane feature extraction. Slice-index intervals modulate gates determined by local features and hidden states, enabling propagation to respond to sampling variations without numerical ODE integration. Reference-guided consistency aligns first- and second-order cross-slice intensity differences to preserve anatomical variation, while distillation from a frozen backbone helps retain in-plane fidelity. Across five training seeds, ContiLNN improves mean PSNR over Restore-RWKV by 0.1907, 1.0176, and 1.2482 dB for CT denoising, MRI super-resolution, and reduced-count PET restoration, respectively, with lower RMSE in all three tasks. CT results are descriptive for one held-out patient. PET ablations support ordered propagation beyond additional pointwise capacity. Under contiguous training, Bi-CfC achieves higher fidelity than a Bi-GRU with similar parameter counts and arithmetic costs across all tested sampling conditions. Matched seven-slice profiling shows 52.8% lower latency and 57.0% lower peak GPU memory use than Bi-GRU. Mixed-gap training improves sparse and irregular-context performance for both operators, without a uniform ranking across metrics and contexts. Experiments with fewer training patients and a second backbone further support data efficiency and backbone compatibility.
A reference architecture for securely sharing one Amazon SageMaker HyperPod EKS cluster across multiple teams, using AWS IAM Identity Center for authentication, per-team SageMaker Domains and Kubernetes namespaces for isolation, HyperPod Task Governance for fairness, and namespace-level cost allocation for chargeback.
Microsoft revealed the specs and price for its Surface Laptop Ultra, AI PCs that run on Nvidia chips that are designed to run AI models…
At a Microsoft event in San Francisco on Wednesday, Jensen Huang and Satya Nadella outlined how NVIDIA and Microsoft are co-engineering hardware and software for AI agents to run on Windows PCs. NVIDIA was founded because of Windows, Huang said. Now AI agents are coming to Windows. “If you look at the entire journey of […]
Microsoft just wrapped up a big Windows and Surface-focused keynote in San Francisco. The biggest announcement was arguably the release details about the Surface Laptop…
Real-time robot control demands enough visual history to infer motion and task progress, but processing that history can delay action. We present Long-WAM, a model-system framework for scaling the context of causal world-action models under real-time control constraints. Our central finding is that access to history is not the same as using it: longer histories pay off far more when the video foundation is pretrained autoregressively (AR). We first learn causal prediction from robot and egocentric videos without action labels, then preserve this history-to-future structure during world-action adaptation. On RoboCasa GR-1, increasing context from 0.0 to 19.2 seconds raises success from 63.3% to 78.7%, whereas a bidirectionally pretrained initialization shows no net gain; robot-domain AR pretraining further raises peak success on GR-1 and LIBERO-Long. Long-WAM also achieves the best results among compared methods on LIBERO-Long, RoboTwin 2.0, and DOMINO. Streaming observation encoding, asynchronous execution, and hardware-specific acceleration enable deployment on RTX 5090, DGX Spark, and Jetson AGX Thor without dropping future prediction; on RTX 5090, each action chunk, including future-video latent prediction, takes 107.4 ms. Real-time deployment on Unitree G1 and YAM supports dynamic and long-horizon manipulation, including 95% success on dynamic cup stacking, where Pi0.5 and Fast-WAM succeed in none of 20 trials. As a memory-informed executor, Long-WAM also complements higher-level planning in composite tasks.
Rapid and accurate prediction of urban wind and temperature fields is important for urban microclimate design and climate adaptation. Large-eddy simulation (LES) effectively resolves these instantaneous fields, but its application is limited in iterative design of urban microclimate applications due to high computational cost. Existing regressive data-driven models offers quick outputs, but they produce only deterministic point predictions that inherently fail to represent turbulent stochasticity. This paper adopts a novel generative framework of Conditional Flow Matching (CFM) that uses building geometry and mean flow as guidance to generate plausible three-dimensional instantaneous velocity and temperature fields for urban microclimate in seconds. To overcome the GPU memory bottleneck of pixel space 3D generation, the model operates in parallel on overlapping pixel space through a shared-noise initialization that preserves high spatial continuity of flow structure across the entire domain. Against reference LES data, the CFM surrogate can rapidly and accurately restore the first-order statistics with Normalized Root Mean Square Error (NRMSE) of 2.99% for wind and 1.77% for temperature, second-order turbulence metrics with NRMSE of 7.17% for wind and 8.84% for temperature, turbulent kinetic energy with NRMSE of 7%, probability density function and vertical profiles in representative locations. Wind engineering application of local gust prediction demonstrate that the speed and accuracy of CFM, supporting the use of generative AI for making turbulence-aware resilient urban design and climate adaptation more computationally feasible.
